Design of motorways and interchanges

151 views 9:01 am 0 Comments July 31, 2023

Introduction

Welcome to the Student Assessment Tasks for RIICWD512E Prepare detailed design of motorways andMarketing Research and Data Analysis interchanges. These tasks have been designed to help you demonstrate the skills and knowledge that you have learnt during your course.

Please ensure that you read the instructions provided with these tasks carefully. You should also follow the advice provided in the Civil Construction Works Student User Guide. The Student User Guide provides important information for you relating to completing assessment successfully.

Assessment for this unit

For you to be assessed as competent, you must successfully complete two assessment tasks:

Assessment Task 1: Knowledge questions – You must answer all questions correctly.

Assessment Task 2: Project – You must work through a range of activities and complete a Project Portfolio.

Assessment Task 1: Knowledge questions

Information for students

Knowledge questions are designed to help you demonstrate the knowledge which you have acquired during the learning phase of this unit. Ensure that you:

review the advice to students regarding answering knowledge questions in the Civil Construction Works Student User Guide

comply with the due date for assessment which your assessor will provide

adhere with Astral College’s submission guidelines

answer all questions completely and correctly

submit work which is original and, where necessary, properly referenced

submit a completed cover sheet with your work

avoid sharing your answers with other students.

Assessment information

Information about how you should complete this assessment can be found in Appendix A of the Civil Construction Works Student User Guide. Refer to the appendix for information on:

where this task should be completed

Comply with the due date for completion of the assessment.

This is an open-book assessment.

Note: You must complete and submit an assessment cover sheet with your work. A template is provided in Appendix C of the Student User Guide. However, if Astral College has provided you with an assessment cover sheet, please ensure that you use that.

Questions

Provide answers to all of the questions below:

Complete the following table about legislation that you need to know about in relation to completing detailed designs of motorways and interchanges.

List two different legislation relevant to detailed designs of motorways and interchanges

Identify the purpose of legislation

Outline how the legislation applies to detailed designs of motorways and interchanges – give one example

Complete the following table about Standards/Technical Specifications that you need to know about in relation detailed designs of motorways and interchanges.

List two different Standards/Technical Specification relevant to detailed designs of motorways and interchanges

Identify the purpose of the Standard/Technical Specification

Outline how the Standard/Technical Specification applies to detailed designs of motorways and interchanges – give one example

Complete the following table regarding the purpose of policies and procedures and general documentation in relation to preparing a detailed design of motorways and interchanges.

Policies and procedures/documentation

How the policy and procedure or documentation informs or contributes to a detailed design of motorways and interchanges

Cultural and heritage management

Design brief

Environmental management plan

Geotechnical management plan

Hydrological and meteorological management plan

Performance reviews

Quality management

Risk assessment and management

Surveys

System close outs (project closure)

Work health and safety

Documentation management (and to ensure all workplace recording and reporting occurs)

Complete the following table identifying two materials that can be used in a motorways and interchanges project and two characteristics/technical capabilities and two limitations of the material you have chosen.

Material type

Characteristics/technical capabilities (2)

Limitations (2)

Choose a type of CAD software that you may use to complete a detailed design of motorways and interchanges. Complete the following table identifying two types of CAD software and two characteristics and two limitations of the software.

CAD Software

Characteristics (2)

Limitations (2)

Explain the use of safe work method statements (SWMS) and outline the purpose of a safe work method statement.

Assume that you have been asked to prepare a detailed design of motorways and interchanges. List two techniques that you could use to identify and evaluate design options.

Complete the table regarding completing calculations as part of data analysis.

Calculation type

Give an example of how this calculation type can be use in motorways and interchanges data analysis

Areas

Volumes

Densities

Mass

Percentages

Grades

Capacity requirements

Geometric design

Explain how road user behaviour impacts on road capacity.

Explain two methods for conducting project cost estimating and at least one advantage and disadvantage of each.  

List five components that should be included in a detailed design plan for motorways and interchanges.

Outline the concept of a self-evaluation, including one advantage and one disadvantage of this method.

Outline two performance review techniques.

List two types of software/technology that could be used to present a detailed design plan for motorways and interchanges.

List three characteristics of effective working relationships.

Assessment Task 1: Checklist

Student’s name:

Did the student provide a sufficient and clear answer that addresses the suggested answer for the following?

Completed successfully?

Comments

Yes

No

Question 1

Question 2

Question 3

Question 4

Question 5

Question 6

Question 7

Question 8

Question 9

Question 10

Question 11

Question 12

Question 13

Question 14

Question 15

Task outcome:

Satisfactory

Not satisfactory

Assessor signature:

Assessor name:

Date:

Assessment Task 2: Project Portfolio

Information for students

In this task, you are required to demonstrate your skills and knowledge by working through a number of activities and completing and submitting a Project Portfolio.

You will need access to:

a suitable place to complete activities that replicates a business environment including a meeting space and computer and internet access

your learning resources and other information for reference

Project Portfolio template

Detailed Design of Motorways and Interchanges Plan Template.

Ensure that you:

review the advice to students regarding responding to written tasks in the Civil Construction Works Student User Guide

comply with the due date for assessment which your assessor will provide

adhere with Astral College’s submission guidelines

answer all questions completely and correctly

submit work which is original and, where necessary, properly referenced

submit a completed cover sheet with your work

avoid sharing your answers with other students.

Assessment information

Information about how you should complete this assessment can be found in Appendix A of the Civil Construction Works Student User Guide. Refer to the appendix for information on:

where this task should be completed

how your assessment should be submitted.

Note: You must complete and submit an assessment cover sheet with your work. A template is provided in Appendix B of the Student User Guide. However, if Astral College has provided you with an assessment cover sheet, please ensure that you use that.

Activities

Complete the following activities:

Carefully read the following.

This assessment task requires you to prepare detailed designs of motorways and interchanges on two occasions. If you are completing this in Astral College, this will be as per the project information provided to you by your assessor. If you are completing this based on a workplace, this will be for two projects of your choice.

Vocational education and training is all about gaining and developing practical skills that are industry relevant and that can help you to succeed in your chosen career. For this reason, basing your project on real relationships with classmates or work colleagues will mean that you are applying your knowledge and skills in a relevant, practical and meaningful way!

You will be collecting evidence for this unit in a Project Portfolio. The steps you need to take are outlined below. Before you begin, complete page 4 of your Project Portfolio.

Preparation.

You are required to plan for and prepare to conduct two detailed designs of motorways and interchanges. This involves:

Accessing the requirements for the work, including all relevant documentation and legislation and policies and procedures.

Interpreting the requirements for each design based on a review of requirements and documentation.

Preparing design plans, including a risk assessment.

Complete Section 1 of your Project Portfolio. The Project Portfolio includes separate sections for you to document your work in relation to Project 1 and Project 2. You will also use the template Detailed design of motorways and interchanges Plan template.

Detailed design.

You are required to carry out the detailed design for both motorways and interchanges projects. This involves:

Interpreting and analysing data as relevant to each project.

Assessing design options.

Develop a detailed design for each project as per the job requirements and your design plan.

Work on Section 2 of your Project Portfolio. The Project Portfolio includes separate sections for you to document your work in relation to Project 1 and Project 2.

When you have completed the steps above, you are to present your work in the next activity.

This means developing a presentation about the designs you have prepared to your team (your assessor and fellow students). Remember that you will be presenting the designs for both projects.

The purpose of your presentation will be to:

Present the work you have completed for review by your team.

Provide an update on the progress of the work, ensuring you advise your team of the next steps for the project.

Provide clarification and advice to assist with the implementation of each design.

Obtain approval for your work.

Prepare your presentation in a format of your choice such as PowerPoint. Use graphical representation techniques so that the information can be easily understood.

Your presentation will be for approximately 15 minutes and your assessor will advise you of the date and time.

Please note that at the presentation you will need to show that you present information using terminology as relevant to motorways and interchanges design and using listening and questioning techniques so make sure you prepare for this as part of your presentation preparation.

Presentation.

You are now required to present your work to your team as per the above instructions.

During your presentation, your assessor will be looking to see that you have reviewed the designs of each motorways and interchanges with the team, provided an update on progress and obtained approval for your designs.

Your assessor will also confirm that you use terminology as relevant to motorways and interchanges design and listening and questioning techniques.

Finalise motorways and interchanges design process.

You are required to finalise the motorways and interchanges design process. This involves:

Reviewing your performance in relation to each of the motorways and interchanges design process you have completed.

Filing all documentation developed in logical files.

Complete Section 3 of your Project Portfolio. The Project Portfolio includes separate sections for you to document your work in relation to Project 1 and Project 2.

Submit your completed Project Portfolio.

Make sure you have completed all sections of your Project Portfolio, answered all questions, provided enough detail as indicated and proofread for spelling and grammar as necessary.

Submit to your assessor for marking.

Assessment Task 2: Checklist

Student’s name:

Did the student:

Completed successfully?

Comments

Yes

No

Complete two detailed designs of motorways and interchanges?

Identify, interpret and document the requirements for each detailed design of motorways and interchanges including (as relevant):

legislation

policies and procedures

plans and drawings

specifications

design briefs

engineering surveys

geotechnical data

hydrological, meteorological, cultural and heritage data

test results of construction materials for motorways and interchanges

data for selecting options for motorways and interchanges?

Access and interpret and then apply documentation required for each detailed design of motorways and interchanges?

Prepare a detailed design plan using the design plan template for each project?

Obtain and then interpret and analyse data for each project including calculating:

areas

volumes

densities

mass

percentages

grades

capacity requirements for motorways and interchanges

components sizes for motorways and interchanges?

Identify and recommend options for each project based on the data analysis, including risk assessment of each option?

Develop and complete detailed design for each motorways and interchanges project as per the design plan?

Prepare and document cost estimates for implementing design of motorways and interchanges for each project?

Present detailed design of motorways and interchanges for each project to stakeholders for review and approval?

Present the detailed design of motorways and interchanges for each project using relevant graphical presentation techniques?

Provide clarification and advice on each project to assist with implementation?

Use communication skills including active listening and questioning to clarify and confirm understanding of client information?

Complete all required documentation for each detailed design of motorways and interchanges?

Communicate and coordinate with progress of team involved in detailed design of motorways and interchanges?

Obtain approval for each detailed design of motorways and interchanges?

File all documentation associated with the detailed design of motorways and interchanges and as part of closing out each project?

Participate in performance review of the detailed design of motorways and interchanges process?

Request client feedback on detailed design of motorways and interchanges to inform review of work completed on each project?

Task outcome:

Satisfactory

Not satisfactory

Assessor signature:

Assessor name:

Date:

Final results record

Student name:

Unit code and title:

RIICWD512E Prepare detailed design of motorways and interchanges

Assessor name:

Date:

Final assessment results

Task

Type

Result

Satisfactory

Unsatisfactory

Did not submit

Assessment Task 1

Knowledge Questions

S

U

DNS

Assessment Task 2

Project Portfolio

S

U

DNS

Overall unit results

C

NYC

Feedback

My performance in this unit has been discussed and explained to me.

I would like to appeal this assessment decision.

Student signature: Date:

I hereby certify that this student has been assessed by me and that the assessment has been carried out according to the required assessment procedures.

Assessor signature: Date:

Tags: , , , , , , , , , , ,