ENG233
Internet of Things (IoT)
Group-based Assignment (2)
Jul 2023 Presentation
ENG233 Group-based Assignment
SINGAPORE UNIVERSITY OF SOCIAL SCIENCES (SUSS) Page 2 of 4
GROUP-BASED ASSIGNMENT
This assignment is worth 15% of the final mark for ENG233 Internet of Things (IoT). Total mark
assigned to this assignment is 100 marks.
The cut-off date for this assignment is Thursday, 26 Oct 2023 by 11:55:00 pm. Late
submissions carry mark penalty.
This is a group-based assignment. You should form a group of a maximum 4 members from
your seminar group. Each group is required to upload a single report via your respective seminar
group site in Canvas. Please elect a group leader. The responsibility of the group leader is to
upload the report on behalf of the group.
In your 1-page cover sheet, please include the names and SUSS student PI numbers of all group
members who have contributed to the completion of this project. Students will be assessed on
their project design solutions, implementation, and report requirements.
The material references for this assignment can are study units notes and references provided in
the study units. You should review these materials before beginning the assignment. You may
also find it necessary to perform additional research in order to provide better answers to the
questions.
____________________________________________________________________________
1. Introduction
To build a good IoT solution, a good solution architect needs to have the fundamental
understanding of how to identify and define the real business and operational problems. How to
prioritize them for the benefits and impact. In the process of designing the solution, architect
shall then break down the problem into various technical stacks of the IoT solution, and then
solve the entire problem from the end-to-end workflow perspective. This GBA aims to give
students an opportunity to identify and articulate an IoT problem, and how to evaluate various
components to solve the problem.
The students will apply their knowledge acquired in the classroom primarily in the areas of
sensors and devices, connectivity and communications protocols, cloud, fog and edge computing
on an agriculture problem to justify their solutions to meet design requirements, which will guide
the implementation of various components of the solution.
2. Learning Objectives
The GBA provides learning objectives in identifying and defining the problems, applying design
thinking and system thinking, evaluating and selecting various sensors, communication
protocols and computing technologies. In this process, students will be able to extend their
learning experience to designing a real-world application, a Location Intelligence IoT Solution.
ENG233 Group-based Assignment
SINGAPORE UNIVERSITY OF SOCIAL SCIENCES (SUSS) Page 3 of 4
3. Project Description
IoT has applications in all industries. Public transportation companies need to track buses, and
monitor drivers’ behaviour for operational efficiency, optimization of services, deployment and
management of resources, and maintenance & support.
Future Transport Co (FTC) is looking to create an intelligent and automated buses and drivers
monitoring systems.
The Intelligent Transport Operations System (ITOS)
The Future Transport Co (FTC) has 50 Buses to deploy, operate and manage in 5 regions of
Singapore. To begin they have deployed 10 buses in each region. However, they would like to
monitor the operations, utilization, and workflow in each region to further optimize and manage
the deployment of buses dynamically adjusting the numbers of buses deployed and their
schedule. FTC would also like to monitor the driver’s behaviour to reward and retrain the drivers
as needed, while providing good and safer experience for drivers and passengers.
Report format
The GBA report should present answers in accordance and meet the requirements as stated in
the questions. All answers should be explained with reference where necessary.
4. System Specifications
The digitalization team at FTC is looking to build ITOS to meet following expectations:
1. Be able to locate all buses within an accuracy of 10 meters on the road.
2. Be able to monitor the dwell time with location and time stamp of buses at bus stops
and/or on road due to any traffic related issues.
3. Be able to monitor driver’s behaviour (such as attention on road, tiredness, driving
pattern etc) and score their driving behaviour automatically in the HR system for further
actions.
4. Recommend the FTC’s operations team on dynamic planning and scheduling of bus in
each region as well as overall operations of 50 buses across Singapore.
5. Solution Design Approach
The Solution will be designed in 3 key steps.
1. Design the system model based on the operational flow.
2. Identify potential components in each solution stack. (Sensors, Connectivity,
Computing)
3. Evaluate and select right components, evaluate technical integration, and finalise the best
fit end to end solution.
ENG233 Group-based Assignment
SINGAPORE UNIVERSITY OF SOCIAL SCIENCES (SUSS) Page 4 of 4
6. Report Requirements
The project report should include suggestions and justifications given with respect to the solution
design and implementation requirements.
1. List down and explain FOUR (4) key cyber security challenges to address while
designing ITOS.
(Description: 5 marks for each point. Total: 20 marks)
2. Propose FOUR (4) Stages Solution Architecture workflow diagram and explain
functionality of each stage for the ITOS.
(Description: 5 marks for each point, Diagram: 10 marks. Total: 30 marks)
3. Design a Cost Based Business Model Matrix to justify the investment in ITOS- List down
FIVE (5) criteria.
Business Process Benefits Key Metric
1.)
2.)
3.)
4.)
5.)
(Description: 3 marks for each. Total: 15 marks)
4. Design a Value Based Business Model Matrix to justify the investment in ITOS- List down
FIVE (5) Value based criteria.
Value Added Services Benefits Key Metric
1.)
2.)
3.)
4.)
5.)
(Description: 3 marks for each. Total: 15 marks)
5. Plan a solutions sales presentation, explaining ITOS business case, end-to-end solution
architecture, and business models. This presentation to be delivered during last tutorial, and
submitted along with the report.
(Presentation: 20 marks. Total: 20 marks)